ASME XI APPENDIX VII SET

Samples designed for specialist training and performance demonstration. Advanced training and qualification in defect detection, defect sizing, complex weld geometries, exotic materials. Also for training technician on equipment and procedures.

8 samples containing a minimum of 20 defects.

1. 2 plates, 1 Carbon steel weld. 1 stainless steel weld. Size 12.5mm
WT x 250mm wide x 300mm weld length.
2. 2 plates, 1 Carbon steel weld. 1 stainless steel weld. Size 25mm
WT x 300mm wide x 300 weld length.
3. 1 pipe weld stainless steel. Size 2” sch160 300mm long
4. 1 pipe weld carbon steel. Size 4” sch160 300mm long
5. 1 pipe weld stainless steel. Size 6” sch160 300mm long
6. 1 pipe weld carbon steel. Size 10” sch160 300mm long(180 degree segment)

These custom specimens are supplied with documentation which clearly identifies the flaw types sizes and locations (Flaw truth).

Document package includes

CAD as built drawing
Flaw size statement
Flaw photograph and tracing
Manual UT and PT report
Material Certs
Weld log and consumable Certs
QA release note

Optional extra

Radiographs
10% calibration notches (POA)
Relevant Calibration block
Lockable storage container

 

 

ASME XI APPENDIX VIII SET

ASME-XI-tubes VIII
1601134137_NDT ASME Section XI, Appendix VII Kit

A Set of samples designed for Specialist training for ASME boiler & pressure vessel code, section XI, appendix VIII
Advanced training and qualification in crack detection, crack sizing in complex weld geometries and exotic material. Also for training technician on equipment and procedures.

Sonaspection produce 3 different material sets. In carbon steel, austenitic or dissimilar weld metal joints.

Each set contains 5 pipe samples and 10 ID breaking cracks per set (except for the dissimilar metal welds set contains 15 cracks)

1. 1 pipe weld. Size 2” sch80 600mm long (not included in the dissimilar set)
2. 1 pipe weld. Size 4” sch80 600mm long
3. 1 pipe weld. Size 6” sch160 600mm long
4. 1 pipe weld. Size 8” sch80s 600mm long (only included in the dissimilar set)
5. 1 pipe weld. Size 12” sch80s 600mm long
6. 1 pipe weld .Size 24” sch80s 600mm long (120 degree segment)

These custom specimens are supplied with documentation which clearly identifies the crack sizes and locations. (Flaw truth)

Document package includes

CAD as built drawing
Flaw size statement
Flaw photograph and tracing
Manual UT and PT report
Material certs
Weld log and consumable certs
QA release note

Optional extra

Radiographs
10% calibration notches (POA)
Relevant Calibration block
Lockable storage container

 

 

More Information